ANALOG CONTROLS
Oscillator Waveform Select: saw, square
Tune Control: +/-1 semitone
Filter: 3-pole 18 dB lowpass resonant filter
Cutoff: filter frequency
Resonance: amount control
CV Mod: amount of filter modulation
Envelope: amount control for modulating the filter
Env Decay: envelope decay time for filter
Accent: amount of signal to modulate the filter and amplifier
Acc Decay: accent decay time
Volume: master/headphone output level control
Overdrive Switch: off/on

DSP EFFECTS
16 preset 24-bit stereo effects include:
Chorus/Room 1
Chorus/Room 2
Delay 1
Delay 2
Chorus
Flange
Plate 1
Plate 2
Plate 3
Room 1
Room 2
Room 3
Hall 1
Hall 2
Rotary Speaker
Low Pass Muffler

SEQUENCER
Number of Patterns: 256 patterns (16 banks x 16 patterns each)
Recorded Pattern Content: note duration, pitch, accent, glide, loop point, time signature, swing amount
Number of Steps Per Pattern: 3/4 time = 12 steps, 4/4 time = 16 steps max
Note Pitch Range: C2 - D#7
Loop Point: 1 to 16 notes per pattern to loop
Pattern Transpose: from -36 to +36 semitones
Other Pattern Features: pattern remixing, play patterns forwards or backwards, copy and paste patterns, pattern shifting, permanent pattern transposing, multiple pattern cueing (for chaining patterns together live), LED chase, real-time editing of pattern information while the sequencer is playing or stopped, sequencer automatically saves all editing
Remix: 256 instant variations for playing each pattern and song
Number of Songs: 16
Number of Steps Per Song: up to 3,580 measures each
Recorded Song Content: tempo, bank/pattern for each step, transpose value for each step, song loop point
Song Pattern Transpose: from -36 to +36 semitones for each song step
Tempo Range: from 20 to 250 beats per minute
MIDI Functions: on/off, channel 1-16, program change messages for selecting patterns remotely
MIDI Sync: internal or external
MIDI Sysex: for backing up patterns and songs
Note Data: transmitted and received
MIDI to CV Converter: Converts internal patterns or external MIDI note data into control voltage and gate signals for controlling other analog synthesizers
MIDI to DIN Sync: converts internal or external MIDI clock messages into DIN Sync clock signals for slaving external DIN Sync devices

INTERFACING
MIDI: in, thru, out
DIN Sync: out
1/4" Jacks: v/oct CV out, +12v gate out (positive polarity), CV in (for modulationg the filter cutoff frequency), external audio input, stereo headphone output, stereo master output

POWER
12 volt AC input, current rating of 1 amp or 1,000 mA

DIMENSIONS
12.5" width, 13" depth, 2.75" height

WEIGHT
5 lbs.

WARRANTY
The Revolution comes with a 1 year limited warranty covering any failure of components being electric or mechanical.
For your warranty to be effective, you must register your unit within 30 days of purchase.
Any modifications done to the Revolution automatically void the warranty!

REVOLUTION V2.00 UPGRADE
V2.00 improves the overall compatibility when using the Revolution with our XS synthesizer. The new OS shifts the incoming and outgoing usable range of MIDI notes from C2-D#7. This was done because most 5-octave keyboards will have their lowest note be MIDI note C2, and C2-C7 is also the playable range for our XS synthesizer. Version 2.00 also fixes a MIDI bug which would sometimes not send a correct Note-off message when you stopped playback while the sequencer was gliding a note. In addition, it fixes a MIDI song position pointer error that existed in the Song mode.